Ledningsevnemåler K-100W IL

Technical data

measuring parameter

Conductivity (inductive) 0 .. 2.000 mS/cm

0 .. 20.00 mS/cm

0 .. 200.0 mS/cm

0 .. 2000 mS/cm

input characteristics

temperature measuring range -30 .. +140 °C

temperature coefficient Adjustable 0 .. 8,0 %/°C or non-linear

output characteristics

output signal 0/4 .. 20 mA (scaleable, galvanically isolated)

load max. 500 Ohm

registration range free scaleable within the measuring range

serial interface RS 485 (optional)

Baud rate 9600

data format 8 bit

power supply

line voltage 24 / 117/ 230 VAC, +6/-10%, 40 .. 60 Hz

power consumption 10 VA

ambient conditions

ambient temperature Operation 0 .. +50 °C, storage -20 .. +65°C

relative humidity max. 90% rH at 40°C (non-condensing)

protection class

panel mounted housing IP 54 (front), IP 30 (housing)

wall mounted housing IP 65

controller

control response on/off controller (adjustable hysteresis)

P/PI controller (pulse-pause, pulse-frequency or continuous output)

relays 2 relays, each with a potential-free NO contact, max. 250V, 6 A, 550

VA

1 alarmrelay with potential-free CO/NO contact, max. 250V, 6A, 550

VA

onset delay 0 .. 200 sec till controller active

digital input Controller stop via external contact

certificates and approvals

CE-symbol Declaration of conformity: The product meets the requirements of the

harmonized European standards. It thus complies with the legal

requirements of the EC directives.

The manufacturer confirms successful testing of the product by

affixing the CE symbol